Furuno RC-1500-1T manual Preparing a macrofile for store-and-forward Telex, 7-11

Preparing a macrofile for store-and-forward Telex

You will need a macrofile to enable automatic message transmis- sion on store-and-forward Telex. After preparing it, save it to the hard disk or a floppy disk for future use.

1.Press function key [F1] to display the File menu.

2.Press the [1] key.

3.Prepare macrofile.

The figure below shows the minimum information required to send a store-and-forward Telex message in MARITEX.

	< [1] UNTITLED1 >	1
@FREE 10
@CALL S: MARITEX		2
@WRU
@CASE GA+?
@SEND TLX80212345+		3
@CASE MSG+?
@SEND B:ABC		4
@SEND NNNN		5
@CASE GA+?
@SEND BRK+

1Free-signal search time (10 minutes

2 Station name (Example: MARITEX) Who are you?

Station identity exchange

3 Subscriber's Telex number (in example, 802 is country code of Hong Kong) for store-and-forward Telex

4 Location and name of file message

5 Request for termination of message

Figure 7-6 Example macrofile for store-and-forward Telex

4. Press function key [F1] to display the File menu.

7-11