XS712T Smart Switch
3.In the LAG Name field, enter the name you want assigned to the LAG.
You can enter any string of up to 15 alphanumeric characters. A valid name has to be specified to create the LAG.
4.Click the unit name in the orange bar to display the ports.
5.Click the box below each port to include in the LAG.
6.Click Apply.
7.To verify the configuration and view the ports that are members of the selected LAG, click Current Members.
LACP Configuration
The LACP configuration screen is used to set the LACP system priority.
To configure LACP:
1.Select Switching > LAG > Advanced > LACP Configuration.
2.From the LACP System Priority field, specify the device’s link aggregation priority relative to the devices at the other ends of the links on which link aggregation is enabled.
A higher value indicates a lower priority. You can change the value of the parameter globally by specifying a priority from
3.Click Apply.
82
