XS712T Smart Switch
VLAN Membership Configuration
Use this screen to configure VLAN Port Membership for a particular VLAN. You can select the Group operation through this screen.
To configure VLAN membership for specific ports and LAGs: 1. Select Switching > VLAN > Advanced > VLAN Membership.
2.From the VLAN ID field, select the VLAN to which you want to add ports.
3.Click the orange bar below the VLAN Type field to display the physical ports on the switch.
4.Click the lower orange bar to display the LAGs on the switch.
5.To select the port(s) or LAG(s) to add to the VLAN, click the square below each port or LAG.
You can add each interface as a tagged (T) or untagged (U) VLAN member. A blank square means that the port is not a member of the VLAN.
•Tagged. Frames transmitted from this port are tagged with the port VLAN ID.
•Untagged. Frames transmitted from this port are untagged. Each port can be an untagged member of only one VLAN. By default, all ports are an untagged member of VLAN 1.
6.Click Apply.
To configure the same VLAN membership settings for all ports and LAGs:
1.Select Switching > VLAN > Advanced > VLAN Membership.
2.In the VLAN ID list, select the VLAN to which you want to add ports.
3.In the Group Operations list, select one of the following options:
•Untag All. All frames transmitted from this VLAN will be untagged. All the ports will be included in the VLAN.
•Tag All. All frames transmitted for this VLAN will be tagged. All the ports will be included in the VLAN.
•Remove All. Excluding all ports from the selected VLAN.
4.Click Apply.
86
