230
XS712T Smart Switch
IP Binding Configuration
When an ACL is bound to an interface, all the rules that have been defined are applied to the
selected interface. Use the IP Binding Configuration screen to assign ACL lists to ACL
Priorities and Interfaces.
To add IP ACL interface bindings:
1. Select Security ACL > Advanced IP Binding Configuration.
2. Select an existing IP ACL in which you want to add an IP ACL interface binding from the
ACL ID menu.
The packet filtering direction for ACL is Inbound, which means the IP ACL rules are
applied to traffic entering the port.
3. Specify an optional sequence number to indicate the order of this access list relative to other
access lists already assigned to this interface and direction.
A low number indicates high precedence order. If a sequence number is already in use
for this interface and direction, then the specified access list replaces the currently
attached access list using that sequence number. If the sequence number is not specified
by the user, then a sequence number that is one greater than the highest sequence
number currently in use for this interface and direction will be used. The valid range is
1–4294967295.
4. Click the appropriate orange bar to expose the available ports or LAGs.
•To add the selected ACL to a port or LAG, click the box directly below the port or LAG
number so that a check mark displays in the box.
•To remove the selected ACL from a port or LAG, click the box directly below the port
or LAG number to clear the selection. A check mark in the box indicates that the ACL
is applied to the interface.
5. Click Apply.