XS712T Smart Switch
Event Logs
Use the Event Log screen to display the event log, which is used to hold error messages for catastrophic events. After the event is logged and the updated log is saved in flash memory, the switch will be reset. The log can hold at least 2,000 entries and is erased when an attempt is made to add an entry after it is full. The event log is preserved across system resets.
To view the event logs:
Select Monitoring > Logs > Event Logs. The Event Logs screen displays
Figure 9. Event Logs screen
The following table describes the Event Log information displayed on the screen.
Table 44. Event log information
Field | Description |
Entry | The number of the entry within the event log. The most recent entry is first. |
|
|
Type | Specifies the type of entry. |
|
|
Filename | The XS712T source code filename identifying the code that detected the event. |
|
|
Line | The line number within the source file of the code that detected the event. |
|
|
Task ID | The |
|
|
Code | The event code passed to the event log handler by the code reporting the event. |
|
|
Time | The time the event occurred, measured from the previous reset. |
|
|
