XS712T Smart Switch

Notification: When notifications are enabled, LLDP interacts with the Trap Manager to notify subscribers of remote data change statistics. The default is Disabled.

Optional TLV(s): Enable or disable the transmission of optional type-length value (TLV) information from the interface. The TLV information includes the system name, system description, system capabilities, and port description. To configure the System Name, see Management on page 26. To configure the Port Description, see Ports on page 77.

4.Click Apply.

LLDP-MED Network Policy

This screen displays information about the LLPD-MED network policy TLV transmitted in the LLDP frames on the selected local interface.

To view LLDP-MED network policy information for an interface:

1.Select System > LLDP > Advanced > LLDP-MED Network Policy. The LLDP-MED Network Policy screen displays.

2.From the Interface list, select the interface with the information to view.

Note: The list includes only the interfaces on which LLDP is enabled. If no interfaces are enabled for LLDP, the Interface list does not display.

The screen refreshes and displays the data transmitted in the Network Policy TLVs. for the interface. The following table describes the LLDP-MED network policy information that displays on the screen.

60

Page 60
Image 60
NETGEAR XS712T-100NES manual LLDP-MED Network Policy