XS712T Smart Switch
For each configured instance, the information described in the following table displays on the screen.
Field | Description |
Bridge Identifier | The bridge identifier for the selected MST instance. It is made up using the |
| bridge priority and the base MAC address of the bridge. |
|
|
Time Since | Displays the total amount of time since the topology of the selected MST |
Topology | instance last changed. The time is displayed in hour/minute/second format, for |
Change | example, 5 hours, 10 minutes, and 4 seconds. |
|
|
Topology | Displays the total number of times topology has changed for the selected MST |
Change Count | instance. |
|
|
Topology | Indicates whether a topology change is in progress on any port assigned to the |
Change | selected MST instance. The possible values are True or False. |
Designated Root | Displays the bridge identifier of the root bridge, which is made up from the |
| bridge priority and the base MAC address of the bridge. |
|
|
Root Path Cost | Displays the path cost to the Designated Root for this MST instance. |
|
|
Root Port | Indicates the port to access the Designated Root for this MST instance. |
|
|
To delete an MST instance:
1.Select the check box next to the instance.
2.Click Delete.
MST Port Configuration
Use the MST Port Configuration screen to configure and display Multiple Spanning Tree (MST) settings on a specific port on the switch.
To configure MST port settings:
1. Select Switching > STP > Advanced > MST Port Configuration.
Note: If no MST instances have been configured on the switch, the screen displays a “No MSTs Available” message.
2.To configure MST settings for a physical port, enter the interface and click Go to select that particular interface.
