XS712T Smart Switch
Note: There is an implicit “deny all” rule at the end of an ACL list. This means that if an ACL is applied to a packet and if none of the explicit rules match, then the final implicit “deny all” rule applies and the packet is dropped.
To add rules to an IP ACL:
1.Select Security > ACL > Advanced > IP Extended Rules.
In the following figure, an extended IP ACL exists, and one rule has been configured.
2.In the ACL ID/Name list, select the ACL to add the rule to.
3.Click Add.
The screen displays the extended ACL Rule Configuration fields.
4.Next to Rule ID, specify a number from
