NETGEAR XS712T-100NES manual Address Table, 134

XS712T Smart Switch

Note: IEEE 802.1D recommends a default of 300 seconds, which is the factory default.

3.Click Apply.

Address Table

The MAC Address Table contains information about unicast entries for which the switch has forwarding and filtering information. This information is used by the transparent bridging function in determining how to propagate a received frame. Use the search function of the MAC Address Table screen to display information about the entries in the table.

To search for an entry in the MAC address table:

1. Select Switching > Address Table > Advanced > Address Table.

2.Use the Search By field to search for MAC Addresses by MAC Address, VLAN ID, or Interface.

•MAC Address. Select MAC Address from the menu and enter a six-byte hexadecimal MAC address in two-digit groups separated by colons, then click Go. If the address exists, that entry will be displayed. An exact match is required.

•VLAN ID. Select VLAN ID from the menu, enter the VLAN ID, for example, 100. Then click Go. If any entries with that VLAN ID exist they are displayed.

134