XS712T Smart Switch

To configure the policy attributes: 1. Click the name of the policy.

The policy name is a hyperlink. The following figure shows the configuration fields for the policy.

2.Configure the policy attributes:

Assign Queue. Select this value from the drop-down list. This is an integer value in the range 0 to 7.

Drop. Select this option to drop packets for this policy-class.

Mark VLAN CoS. Select this value from the drop-down list. This is an integer value in the range from 0 to 7 for setting the VLAN priority.

Mark IP Precedence. Select this value from the drop-down list. This is an IP Precedence value in the range from 0 to 7.

167

Page 167
Image 167
NETGEAR XS712T-100NES manual 167