XS712T Smart Switch
MAC Binding Configuration
When an ACL is bound to an interface, all the rules that have been defined are applied to the selected interface. Use the MAC Binding Configuration screen to assign MAC ACL lists to ACL Priorities and Interfaces.
To configure MAC ACL interface bindings:
1. Select Security > ACL > Basic > MAC Binding Configuration.
2.Select an existing MAC ACL which requires binding configuration from the ACL ID menu.
The packet filtering direction for ACL is Inbound, which means the MAC ACL rules are applied to traffic entering the port.
3.Specify an optional sequence number to indicate the order of this access list relative to other access lists already assigned to this interface and direction.
A low number indicates high precedence order. If a sequence number is already in use for this interface and direction, the specified access list replaces the currently attached access list using that sequence number. If the sequence number is not specified by the user, a sequence number that is one greater than the highest sequence number currently in use for this interface and direction will be used. The valid range is
4.Click the appropriate orange bar to expose the available ports or LAGs.
•To add the selected ACL to a port or LAG, click the box directly below the port or LAG number so that a check mark displays in the box.
•To remove the selected ACL from a port or LAG, click the box directly below the port or LAG number to clear the selection. An check mark in the box indicates that the ACL is applied to the interface.
