XS712T Smart Switch
To delete a class:
1.Select the check box next to the class name.
2.Click Delete.
The same set of fields described for IPv6 ACL classification are also supported as match criteria for DiffServ classes. Prior to the introduction of IPv6 class rule fields, any layer 3 or layer 4 item was interpreted as a field in an IPv4 packet. To properly interpret the match criteria fields and create classifier entries, it is necessary for the configuration to specify what type of packet a class defines.
Policy Configuration
Use the Policy Configuration screen to associate a collection of classes with one or more policy statements. After creating a Policy, click the policy link to the Policy screen.
To create a new DiffServ policy:
1.Select QoS > DiffServ > Advanced > Policy Configuration.
2.Enter a policy name in the Policy Name field.
3.Select the existing DiffServ class to associate with the policy.
4.Click Add.
The available policy type is In, which indicates the type is specific to inbound traffic. This field is not configurable.
To rename an existing policy or add a new member class to the policy:
1.Select the check box next to the configured class.
2.Update the desired fields.
3.Click Apply.
To delete a policy:
1.Click the check box associated with the policy to remove.
2.Click Delete.
