XS712T Smart Switch
2.To configure port security settings for a Link Aggregation Group (LAG), click LAGS.
3.To configure port security settings for both physical ports and LAGs, click ALL.
4.To configure settings for a physical port, enter the port in unit/slot/port format and click on the Go button.
The entry corresponding to the specified port will be selected.
5.Select the check box next to the port or LAG to configure.
Select multiple check boxes to apply the same setting to all selected interfaces. Select the check box in the heading row to apply the same settings to all interfaces.
6.Specify the following settings:
•Port Security. Enable or Disable the port security feature for the selected port.
•Max Allowed Dynamically Learned MAC. Sets the maximum number of dynamically learned MAC addresses on the selected interface.
•Max Allowed Statically Locked MAC. Sets the maximum number of statically locked MAC addresses on the selected interface.
•Enable Violation Traps. Enables or disables the sending of new violation traps designating when a packet with a disallowed MAC address is received on a locked port.
