XS712T Smart Switch
2.Select Create Filter from the MAC Filter menu.
If no filters have been configured, this is the only option available.
3.From the VLAN ID menu, select the VLAN to use with the MAC address to fully identify packets you want filtered.
You can change this field only when the Create Filter option is selected from the MAC Filter menu.
4.In the MAC Address field, specify the MAC address of the filter in the format 00:01:1A:B2:53:4D.
You can change this field when you have selected the Create Filter option. You cannot define filters for the following MAC addresses:
•00:00:00:00:00:00
•01:80:C2:00:00:00 to 01:80:C2:00:00:0F
•01:80:C2:00:00:20 to 01:80:C2:00:00:21
•FF:FF:FF:FF:FF:FF
5.Click the orange bar under the Source Port Members heading to display the available ports. Select the port(s) to include in the inbound filter.
If a packet with the MAC address and VLAN ID you specify is received on a port that is not in the list, it will be dropped.
6.Click the orange bar under the Destination Port Members heading to display the available ports.
Select the port(s) to include in the outbound filter. Packets with the MAC address and VLAN ID you selected will be transmitted only out of ports that are in the list. Destination ports can be included only in the Multicast filter.
7.Click Apply.
To delete a configured MAC filter:
1.In the MAC Filter list, select the filter to remove.
2.Click Delete.
