XS712T Smart Switch
EAP Statistics
Use the EAP Statistics screen to display information about EAP packets received on a specific port.
To display the EAP statistics screen:
1. Select Monitoring > Ports > EAP Statistics.
2.Select whether to display physical interfaces, link aggregation groups (LAGs), or both by clicking one of the following links above the table heading:
•1. Only physical interfaces are displayed. This is the default setting.
•All. Both physical interfaces and link aggregation groups are displayed.
To locate an interface quickly, type the interface number (for example, xg12) in the Go To Interface field at the top or bottom of the table and click Go.
The following table describes the EAP statistics displayed on the screen.
Table 40. EAP statistics
| Field | Description |
|
| Ports | The interface which is polled for statistics. |
|
|
|
|
|
| Frames Received | The number of valid EAPOL frames received on the port. |
|
|
|
|
|
| Frames Transmitted | The number of EAPOL frames transmitted through the port. |
|
|
|
|
|
| Start Frames Received | The number of EAPOL Start frames received on the port. |
|
|
|
|
|
| Logoff Frames Received | The number of EAPOL Log off frames that have been received on the |
|
|
| port. |
|
| Last Frame Version | The protocol version number attached to the most recently received |
|
|
| EAPOL frame. |
|
|
|
|
|
| Last Frame Source | The source MAC Address attached to the most recently received |
|
|
| EAPOL frame. |
|
|
|
|
|
|
|
|
|
