XS712T Smart Switch
2.From the Querier Admin Mode field, enable or disable the administrative mode for IGMP Snooping Querier.
3.Specify the IP address to be used as source address in periodic IGMP queries om the Snooping Querier Address field.
This address is used when no address is configured on the VLAN on which the query is being sent.
4.Specify the IGMP protocol version used in periodic IGMP queries in the IGMP Version field.
5.Specify the time interval in seconds between periodic queries sent by the snooping querier in the Query Interval field.
The Query Interval must be a value in the range of
6.Specify the time interval in seconds after which the last querier information is removed in the Querier Expiry Interval field.
The Querier Expiry Interval must be a value in the range of
7.Click Apply.
IGMP Snooping Querier VLAN Configuration
Use this screen to configure IGMP queriers for use with VLANs on the network.
To create a new VLAN ID for IGMP snooping:
1. Select Switching > Multicast > IGMP Snooping Querier > Querier VLAN Configuration.
