XS712T Smart Switch
Server Log
Use the Server Log screen to allow the switch to send log messages to the remote logging hosts configured on the system.
To configure local log server settings:
1. Select Monitoring > Logs > Server Log link.
2.Select the radio buttons in the Admin Status field to determine whether to send log messages to the remote syslog hosts configured on the switch.
•Enable. Messages will be sent to all configured hosts (syslog collectors or relays) using the values configured for each host.
•Disable. Stops logging to all syslog hosts. Disable means no messages will be sent to any collector/relay.
3.In the Local UDP Port field, specify the port on the switch from which syslog messages are sent.
4.Click Apply to save the settings.
The Server Log Configuration area displays the following information:
•The Messages Received field shows the number of messages received by the log process. This includes messages that are dropped or ignored.
•The Messages Relayed field shows the number of messages forwarded by the syslog function to a syslog host. Messages forwarded to multiple hosts are counted once for each host.
•The Messages Ignored field shows the number of messages that were ignored.
