Cisco Systems SCE 2000 4xGBE manual Installing the SCE 2000 Platform, Site Requirements

Chapter 4 Installation and Maintenance

Installing the SCE 2000 Platform

Site Requirements

The following tables contain the site requirement specifications for the SCE 2000.

Table 4-2	SCE 2000 Environmental Requirements
Specification		Acceptable Range
Temperature -		nominal 41°F to 104°F (5°C to 40°C)
Short term temperatures*		23°F to 131°F (-5°C to +55°C)
Relative humidity		5% to 95% (non-condensing)
Heat dissipation		683 BTU/hour

*Short term is defined as not more than 96 consecutive hours, not more than 15 days in one year. 360 hours total in any given year, but no more than 15 occurrences in a one-year period.

Table 4-3	SCE 2000 Approvals Specifications
Approval	Specification
EMC	• CE Mark
	• EMISSIONS: FCC Part 15 CFR 47 Class A, EN 55022 Class A, CISPR22
	Class A, VCCI Class A, AS/NZS CISPR22 Class A
	• Immunity - EN 50082-1 EN 55024, CISPR24 (ESD, RFI, EFT, etc.)
	(Commercial)
Safety	UL/CSA 60950, IEC60950, EN60950, AS/NZS, 60950, NOM-
	019,IEC/EN60825-1, -2, 21CFR1040, 73/23/ECC

For more complete information regarding safety and regulatory compliance, refer to the Regulatory Compliance and Safety Information for the Cisco Service Control Engine document.

Warning The DC-powered SCE 2000 should be installed in a Restricted Access Location only.

Installing the SCE 2000 Platform

The SCE 2000 operates as either a tabletop or a rack-mounted unit. A rack-mounting kit is included with the SCE 2000 when it is shipped from the factory. The kit provides the hardware needed (see SCE 2000 Components List) to mount the SCE 2000 in either of two types of standard 19-inch equipment rack:

•19-inch rack with only two posts in the front: Use the supporting brackets included in the kit

•19-inch rack with four posts, two in the front and two in the back: Use the crossrail supports included in the kit

SCE 2000 4xGBE Installation and Configuration Guide

4-4 OL-7824-02