Cisco Systems SCE 2000 4xGBE manual Managing SCE 2000 Configurations, Viewing Configuration

Chapter 7 Basic SCE 2000 Platform Operations

Managing SCE 2000 Configurations

EXAMPLE:

The following example shows the current User-File-Log device counters.

SCE 2000#show logger device user-file-log counters

Logger device User-File-Log counters:

Total info messages: 1

Total warning messages: 0

Total error messages: 0

Total fatal messages: 0

If there are “Total error messages” or “Total fatal messages”, use the show logger device User-File-Logcommand to display details about the errors.

Managing SCE 2000 Configurations

The procedures for managing SCE 2000 configurations are explained in the following sections:

•Viewing Configuration (on page 7-4)

•Saving the Configuration Settings (on page 7-7)

•Recovering a Previous Configuration (on page 7-9)

Viewing Configuration

When you enter configuration commands, it immediately effects the SCE 2000 platform operation and configuration. This configuration, referred to as the running-config,is saved in the SCE 2000 platform volatile memory and is effective while the SCE 2000 platform is up. After reboot, the SCE 2000 platform loads the startup-config, which includes the non-default configuration as saved by the user, into the running-config.

The SCE 2000 platform provides commands for:

•Viewing the running configuration

•Viewing the startup configuration

After configuring the SCE 2000 platform, you may query for the running configuration using the command show running-config.This command displays the non-default running configuration. To view the complete SCE 2000 platform running configuration, including both default and user-configured configuration, you may use the option all-datain the show running-configcommand.

SCE 2000 4xGBE Installation and Configuration Guide

7-4 OL-7824-02