Cisco Systems SCE 2000 4xGBE Organization, Chapter, Title, Description, Introduction on page

Preface

Organization

Organization

The major sections of this guide are as follows:

Chapter	Title	Description
1	Introduction (on page 1-1)	This chapter provides a brief introduction to Cisco Service
		Control.
2	Overview ( on page 2-1)	This chapter provides a hardware overview of the SCE
		2000 platform.
3	Topology (on page 3-1)	This chapter describes the possible deployment topologies
		of the SCE 2000 and explains how various aspects of the
		topology determine the configuration of the system.
4	Installation and	This chapter explains how to install a SCE 2000 platform
	Maintenance (on page 4-	in a rack or in a general tabletop installation and how to
	1)	install or replace the power supply units and fan modules.
5	Connecting the	This chapter explains how to connect the SCE 2000
	Management Interfaces	platform to a local console and perform the initial system
	and Performing Initial	configuration via the setup wizard that runs automatically.
	System Configuration (on
	page 5-1)
6	Cabling the Line Ports	This chapter provides instructions for cabling the Gigabit
	and Completing the	Ethernet ports for both one and two SCE 2000 topologies,
	Installation (on page 6-1)	and for configuring Gigabit Ethernet (GBE) interface
		parameters. In a topology utilizing two SCE 2000s
		(cascade), this includes the cascade ports as well as the
		line ports.
7	Basic SCE 2000 Platform	This chapter describes how to start up the SCE 2000
	Operations (on page 7-1)	platform, reboot, and shutdown. It also describes how to
		manage configurations.
8	Troubleshooting (on page	This chapter provides basic system startup troubleshooting
	8-1)	information.
A	The External Optical	This appendix explains how to install the external optical
	Bypass Module (on page	bypass module.
	A-1)

SCE 2000 4xGBE Installation and Configuration Guide

vi OL-7824-02