Cisco Systems SCE 2000 4xGBE Installation and Maintenance, Installing the SCE 2000 Platform, 4-16

C H A P T E R 4

Installation and Maintenance

This chapter explains how to install a SCE 2000 platform in a rack or in a general tabletop or workbench installation. Additionally, this chapter contains instructions for installing or replacing the power supply units and fan modules.

Warning Before you install, operate, or service the system, read the Site Preparation and Safety Guide. This guide contains important safety information you should know before working with the system.

This chapter contains the following sections:

•	Preparing to Install the SCE 2000 Platform		4-1
•	Installing the SCE 2000 Platform 4-4
•	Power Supply Overview	4-16
•	Removing and Replacing a Power Supply Unit		4-19
•	Fan Module Overview	4-25
•	Replacing the Battery	4-28

Preparing to Install the SCE 2000 Platform

Before installing your SCE 2000 platform, you should consider the power and cabling requirements that must be in place at your installation site, the equipment you need to install the platform, and the environmental conditions your installation site must meet to maintain normal operation. This section guides you through the process of preparing for your SCE 2000 platform installation and the installation in a rack. The section contains the following topics:

•Tools and Parts Required (on page 4-2)

•Site Requirement Guidelines (on page 4-3)

SCE 2000 4xGBE Installation and Configuration Guide

OL-7824-02 4-1