Cisco Systems SCE 2000 4xGBE manual Fan Module Overview, Removing and Replacing the Fan Module

Chapter 4 Installation and Maintenance

Fan Module Overview

This completes the steps for reconnecting the DC-input power supply to the SCE 2000 platform.

Fan Module Overview

The fan module provides cooling for the internal components. The fan drawer is a field- replaceable unit containing five fans, and is installed at the right rear of the SCE 2000 platform.

When a fan malfunctions, the fan module should be replaced as promptly as possible. Although it is possible for the unit to function for some time with one non-functioning fan, this is not optimal or recommended.

Figure 4-16: SE2000 Fan Module

When a fan failure occurs, the environment monitor will send an error message to the console. An SNMP trap indicating that the fan is not functioning properly is also sent. Note that a fan failure is often audible.

Removing and Replacing the Fan Module

The following sections explain how to remove and replace a fan module in a SCE 2000 platform:

•Removing the Fan Module (on page 4-26)

•Replacing the Fan Module (on page 4-26)

SCE 2000 4xGBE Installation and Configuration Guide

OL-7824-02 4-25