Cisco Systems SCE 2000 4xGBE manual Configuring Time Settings, Note Passwords are case sensitive

Chapter 5 Connecting the Management Interfaces and Performing Initial System Configuration

Initial System Configuration

Note Passwords are case sensitive.

Note The default password for all levels is “cisco”.

To change the passwords, complete the following steps:

Step 1 The default User password is displayed.

•To accept the displayed value, press Enter.

•To change the value, type the desired string and press Enter. Step 2 The default Admin password is displayed.

•To accept the displayed value, press Enter.

•To change the value, type the desired string and press Enter. Step 3 The default Root password is displayed.

•To accept the displayed value, press Enter.

•To change the value, type the desired string and press Enter.

Step 4 Configure password encryption. By default, password encryption is not enabled.

•To disable password encryption, press Enter.

•To enable password encryption, type y and press Enter.

EXAMPLE:

Following is an example of changing all passwords. Password encryption is not enabled (default).

Enter a User password [cisco]: userin

Enter an Admin password [cisco]: mng123

Enter a Root password [cisco]: cistech

Enable passwords encryption? [no]:

Step 4: Configuring Time Settings

The time settings menu configures all time and date related parameters in the system. The time settings menu includes the following:

•Time zone

•Local time

•Date

•SNTP menu

SCE 2000 4xGBE Installation and Configuration Guide

5-8 OL-7824-02