Cisco Systems SCE 2000 4xGBE manual Tools and Parts Required

Chapter 4 Installation and Maintenance

Preparing to Install the SCE 2000 Platform

Figure 4-1: SCE 2000 Measurements

Table 4-1	SCE 2000 Dimensions
Dimension	Measurement
Height	3.47 inches (9.5 cm)
Width	17.4 inches (4.43 cm)
Depth	18 inches (4.6 cm)
Weight	33 lb (15 kg)

Tools and Parts Required

The SCE 2000 chassis is fully assembled at the factory, including the application and software packages. No assembly is required. However, you need the following tools and equipment to install the SCE 2000 chassis and the rack-mount kit (if installing the SCE 2000 platform in a rack), fan modules, and power supplies:

•Number 1 and 2 Phillips screwdriver

•1/4 inch flat-blade screwdriver

•#¼” Hex Wrench

•Screws compatible with your rack (for mounting the SCE 2000 to the rack)

•12 AWG or 2.5-mm copper installation wire with hex or loop connectors for DC power leads Ring terminals must be UL approved and suitable for 12 AWG wire.

•Level (optional)

•Tape measure (optional)

•Appropriate cables to connect the SCE 2000 to the network and console terminal

SCE 2000 4xGBE Installation and Configuration Guide

4-2 OL-7824-02