Liebherr HC1050 To Start the IceMaker - Figure, To turn ON, To turn OFF, To make ice cubes

FREEZER COMPARTMENT

To Start the IceMaker - Figure 39

The IceMaker will only work if the combined refrigerator-freezer is connected to the electrical outlet. It will only make ice cubes if the freezer compartment is operating and if the minimum freezer temperature is 14°F (-10°C).

The IceMaker is in the top left drawer in the freezer compartment of the combined refrigerator-freezer. You can identify this drawer by its labeling “IceMaker.”

To turn ON

●Pull out the drawer.

●Press the “ON/OFF” button so the control lamp comes on (Figure 39).

●Close the drawer.

Note

The IceMaker can only make ice cubes if the drawer is completely closed.

Figure 39

To turn OFF

If you do not need any ice cubes, the IceMaker can be turned off independently of the freezer compartment.

●Press the “ON/OFF” button for approximately 1 second so the control lamp goes out.

Note

If the IceMaker is turned off, the empty drawer can also be used to freeze and store food.

To make ice cubes

After you start the icemaker for the first time it may take up to 24 hours before the first ice cubes are ready.

Note

The first three batches of ice must not be consumed or used. This will help ensure that the water supply lines are free of contaminants.

The production capacity depends on the temperature inside the freezer compartment. The lower the temperature, the more ice can be produced over a period of time.

The ice cubes fall out of the icemaker into the drawer.When the ice reaches a certain level in the drawer, the appliance stops producing ice automatically.

If you need a large quantity of ice you can change out the drawer to the right with the complete “IceMaker” drawer. When you close the drawer the icemaker will immediately start production.

A delight in freshness

HC 1001 / HC 1050 29