INSTALLATION
Installing Into a Kitchen Cabinet 2. Gently pry open the top bracket cover (Fig. 16, 1).
1 
Figure 14
All attachment components are provided.
CAUTION
To protect the appliance from possible damage, allow the appliance to stand 30 minutes to 1 hour in place before turning the electricity on. This allows the refrigerant and system lubrication to reach equilibrium.
1.Insert the equalizer trim (Fig. 15, 20) in the slot so it is flush on the handle side and on the edge of the appliance front. Secure to the appliance with collar screws (Fig. 15, 21).
Figure 16
3.Position the power source cable so it can be easily connected once the appliance is installed. Use a piece of string to fish the cable (Fig. 7, 1) if necessary.
Figure 15
A delight in freshness
HC 1001 / HC 1050 | 13 |
