Liebherr HC1001 Troubleshooting, Problem, Possible Cause and Remedy, Failure/FrostControl Display

Models: HC1050 HC1001

1 41
Download 41 pages 59.58 Kb
Page 38
Image 38
TROUBLESHOOTING

TROUBLESHOOTING

Your appliance is designed and manufactured for a long life and reliable operation.

If a problem occurs during operation, check whether it is due to an operating error. Please note

that even during the warranty period, some repair costs may be your responsibility.

You may be able to correct the following faults by checking the possible causes yourself:

Problem

Possible Cause and Remedy

 

 

 

Appliance does not work,

- Is the appliance turned ON properly?

display is OFF

- Is the power source plug properly inserted in the socket?

 

- Is the circuit breaker or fuse in operating condition?

 

 

 

The interior light does

- Is the refrigerator compartment turned ON?

not come ON

- Has the door been open for more than 15 minutes?

 

- The bulb is defective. Change the bulb as described in Interior light.

 

 

 

Loud running noise

- Is the appliance standing firmly on the floor, or does the compressor

 

cause nearby items of furniture or objects to vibrate? If necessary, move

 

bottles and containers apart.

 

- Bubbling noises are normal. These are caused by the refrigerant

 

flowing around the refrigerant circuit.

 

- A short clicking sound: This will be heard whenever the compressor

 

turns ON or OFF automatically.

 

- Motor noise: This will be slightly louder for a brief period when the

 

compressor turns ON. The refrigerating capacity will increase when

 

the SuperFrost function is activated, fresh food has just been placed in

 

the appliance or the door has been left open for a while. A low-pitched

 

humming sound is caused by air flow noises in the fan.

 

 

 

The compressor continues

On energy saving models, this is perfectly normal. When less refrigeration

to run for a long time

is required, the VCC compressor switches to a low speed. It will run almost

 

constantly, but it still saves energy.

 

 

 

 

- The alarm sounds,

- Have you put too much fresh food into the freezer without activating

- the temperature is not

SuperFrost? See SuperFrost.

cold enough

- Does the door close properly?

 

- Is the appliance sufficiently ventilated? Clean ventilation grilles if

 

necessary.

 

- Is the ambient temperature too hot? See Safety Regulations.

 

- Has the appliance been opened too often or left open too long?

 

- If applicable, wait until the appliance reaches the required temperature itself.

 

 

 

 

appears in the

There has been a power failure; proceed as described in Power

display

Failure/FrostControl Display.

 

 

 

IceMaker is not making

- Is the IceMaker turned on?

any ice.

- Is the water supply line open?

 

- Is the IceMaker drawer closed properly?

 

 

 

 

A delight in freshness

32

HC 1001 / HC 1050

Page 38
Image 38
Liebherr HC1001 Troubleshooting, Problem, Possible Cause and Remedy, Failure/FrostControl Display, A delight in freshness