OPERATION
Changing the Temperature Display
The temperature reading can be displayed in either degrees Fahrenheit or degrees Celsius.
When the appliance is first turned on or after a power failure, the refrigerator Temperature Display and Setting Display (Fig. 1, 7) will show the set temperature display, either degrees Fahrenheit or degrees Celsius, for five seconds. Then, the actual temperature is displayed.
To change the temperature display:
1.First press and hold the Alarm Button (Fig. 1, 5) and then aditionally the Down
Refrigerator Temperature Button (Fig. 1, 8) for seven seconds. The set temperature display will blink six times.
2.While the temperature display is blinking, hold the Alarm Button and use the Down Refrigerator Temperature Button to change the temperature display.
3.After making the change, the new temperature display will blink six times. Then both temperature displays will show the actual temperature value.
Temperature Display - Figure 1
In normal operation, the following settings will be displayed:
●The average refrigerator temperature in
display (Fig. 1, 7)
●The warmest frozen food temperature in display (Fig. 1, 1).
When starting up for the first time or when the appliance is warm, dashes will appear until the temperature reaches a level that can be displayed; 32°F to 60°F (0°C to 19°C) in the refrigerator and below 32°F (0°C) in the freezer.
It will take between three and eight hours for the required temperature, 0°F or 41°F
The display will “flash:”
●If you change the temperature or
●If the temperature rises by several degrees, indicating cold loss, e.g. if you place fresh, “warm” food in the freezer or if you remove or repack frozen food, the temperature may rise for a short time due to warm air flowing into the freezer. Once you have finished loading or repacking, the electronics will automatically reset the temperature to the most recent setting.
If “F0” to “F5” appears in the display, the appliance has a fault. Have the fault number available when you contact the customer service department. See Customer Service.
Display Brightness - Figure 1
Your appliance is delivered with the display brightness set to low.
When the door is opened or the temperature settings are changed, the display automatically switches to bright for one minute, or as long as the alarm state lasts.You can change the brightness if required.
●To make display brighter: Keep the Alarm Button pressed while simultaneously pressing the Up Freezer Temperature Button
(Fig. 1, 2).
●To make display darker: Keep the Alarm Button pressed while simultaneously pressing the Down Freezer Temperature Button (Fig. 1, 2).
A delight in freshness
HC 1001 / HC 1050 | 21 |
