TINT
You can adjust the skin tone in the projected image.
More 
More
reddish 
greenish
Setting range:
When PC is connected, this function is available with 1 125 (1 080)/60i, 1 125 (1 080)/50i,
1 125 (1 080)/60p and 1 125 (1 080)/50p signals only.
SHARPNESS
You can adjust the sharpness of the projected image.
Less 
More
sharp 
sharp
Setting range is vary according to the selected input signal
COLOUR TEMPERATURE
You can adjust the white balance of the projected image.
Less 
Less
bluish 
reddish
Setting range:
DYNAMIC IRIS
You can switch automatic adjustment of the lamp and the lens iris on/off.
•ON: Automatic adjustment
•OFF: No adjustment
LIGHT HARMONIZER
LUMINANCE SENSOR detects the brightness of the room and keeps the luminance in balance automatically. If needed, you can switch on/off this function or adjust it manually. Press I H to cycle through the options.
LIGHT HARMONIZER
MODE | AUTO |
MANUAL ADJUST
• OFF No adjustment
•AUTO: Automatic adjustment
•MANUAL: Manual adjustment (0 - +8)
PICTURE Menu
NOTE:
To assure correct performance of the LIGHT HARMONIZER, do not interrupt the light onto the
LUMINANCE SENSOR.
ADVANCED MENU
From the ADVANCED MENU, you can perform more detailed image adjustment manually.
GAMMA
You can adjust linear intensity at 3 levels. Press I H to increase/decrease.
Levels | Default setting |
|
|
GAMMA HIGH | 0 |
|
|
GAMMA MID | 0 |
|
|
GAMMA LOW | 0 |
|
|
Setting range:
CONTRAST
You can adjust the amount of contrast in RGB colours individually. Press I H to increase/decrease.
RGB | Default setting |
|
|
CONTRAST R | 0 |
|
|
CONTRAST G | 0 |
|
|
CONTRAST B | 0 |
|
|
Setting range:
BRIGHTNESS
You can adjust the brightness in RGB colours individually. Press I H to increase/decrease.
RGB | Default setting |
|
|
BRIGHTNESS R | 0 |
|
|
BRIGHTNESS G | 0 |
|
|
BRIGHTNESS B | 0 |
|
|
Setting range:
COLOUR MANAGEMENT
You can manage your own defined colour settings. See “Setting your own colour profile” on page 24.
Settings
ENGLISH - 29
