![](/images/new-backgrounds/1264788/26478843x1.webp)
Remote control operation
Basic Operation
Operating range
You can operate the projector with the Remote control within the remote range 7 m.
Facing to the projector
Ensure the Remote control emitter is facing to the Remote control signal receptor on front of the projector and press the required buttons to operate.
Facing to the screen
Ensure the Remote control emitter is facing to the screen and press the required buttons to operate the projector. The signal will be reflected off the screen. The operating range may differ due to the screen material.
NOTE:
The Remote control may malfunction under strong light such as a fluorescent. Do not let strong light shine onto the signal receptor.
If there are any obstacles in between the remote control unit and the receptor, the Remote control may not operate correctly.
Input switching
You can switch the input method manually by pressing the INPUT SELECT button. Press the button several times or press I H to cycle through the input methods as follows. The actual projected image will be changed in a while.
COMPONENT IN IH
FGFG
PC IN IH HDMI IN IH VIDEO IN
| Connected to COMPONENT | |
COMPONENT IN | IN terminal equipment’s | |
| signal | |
Connected to | ||
terminal equipment’s signal | ||
| ||
VIDEO IN | Connected to VIDEO IN | |
terminal equipment’s signal | ||
| ||
HDMI IN | Connected to HDMI terminal | |
equipment’s signal | ||
| ||
PC IN | Connected to PC IN terminal | |
equipment’s signal | ||
| ||
|
|
Graphical guidance will be displayed on the upper right of the display and you can confirm the selected input method which is hilighted in yellow. See "INPUT GUIDE" on page 34.
NOTE:
If you select an unplugged input method, the guidance will blink on and off several times. See "List of compatible signals" on page 41. See "Connecting terminals" on page 13.
Capturing an image
When projecting an image, press FREEZE to capture the projected image and display it on the screen as a still picture. Press again to escape.
NOTE:
Escaping from the freeze mode is available by pressing any button except the LIGHT button.
22 - ENGLISH