| Adjust the vividness of the colour. | |
COLOUR | Setting range: | |
| Default: 0 | |
| Adjust the colour tone. | |
TINT | Setting range: | |
| Default: 0 | |
BRIGHTNES | Adjust the brightness of the colour. | |
Setting range: | ||
S | ||
Default: 0 | ||
| ||
|
|
4. Press ENTER to store the adjusted result.
“PROCESSING” is displayed for a few seconds and the result is stored in LOG.
You can store up to 8 logs under LOG for each PICTURE MODE setting.
5.Press MENU or RETURN to return to the previous menu.
Repeat the steps above to store more adjustment.
Managing stored logs
You can edit or delete the stored logs of the selected PICTURE MODE.
1.Select LOG and press ENTER.
The LOG menu is displayed.
PICTURE MODE : CINEMA1
POINT1
POINT2
POINT3
POINT4
POINT5
POINT6
POINT7
POINT8
ALL DELETE
Sampled colour
Adjusted colour
2.Select the required log from 1 - 8 or ALL DELETE, and press ENTER.
Select CHANGE to edit the log.
The cursor menu is displayed and you can readjust the colour.
Select DELETE to delete the log.
The confirmation screen will be displayed. Select OK to delete.
When you select ALL DELETE, the "DELETE ALL LOG." screen is displayed. Select OK to delete all logs. The PROFILE setting will be set to NORMAL.
Saving a log setting as a profile
Return to the COLOUR MANAGEMENT menu and save the stored log as a profile. Make sure that the PICTURE MODE is not switched.
Remote control operation
1.Select the PROFILE SAVE menu and press
ENTER
The PROFILE SAVE menu is displayed. You can save the profile as USER1, USER2 and USER3.
USER1
USER2
USER3
2. Press ENTER to save the profile
The confirmation screen is displayed. Press ENTER again to save.
Loading saved profiles
When profiles are loaded under the PICTURE MODE setting, you can keep them as you defined until the PROFILE is set to NORMAL.
1.Select the required PICTURE MODE and press ENTER.
2.Press the COLOR MANAGEMENT button and select the PROFILE menu.
The profile settings of the selected PICTURE MODE will be displayed.
3.Select the required profile and press ENTER.
NORMAL | Return to the default setting of the | |
PICTURE MODE | ||
| ||
USER1 |
| |
USER2 | Defined profile settings. | |
USER3 |
| |
|
|
NOTE:
LOG and PROFILE SAVE are not displayed before you apply COLOUR MANAGEMENT.
If you load a profile with a different attribute mode of the profile, the CURSOR and PROFILE SAVE menus will not be displayed.
The approximate colours will be adjusted at the same time. If you adjust the exact same colour differently, both colours will affect each other and you might get unexpected results.
White, Black and Grey are not adjustable.
If you escape the COLOUR MANAGEMENT menu or attempt to perform another menu action before you save the adjusted profile, the confirmation screen will be displayed.
If you switch the input signal before you save the profile, the setting will be cancelled without notice.
Basic Operation
ENGLISH - 25
