PICTURE Menu
See “Navigating through the MENU” on page 26.
Reproducing colour of an sRGB image
For reproducing the original colour of
1.Press PICTURE ADJUSTMENT and select
NATURAL.
2.Press DEFAULT to reset the other
3.Press RETURN once to return to the Main menu and select OPTION
4.Switch the LAMP POWER to NORMAL
NOTE:
It may take for a while until the selected mode is stabilised.
CONTRAST
You can adjust the contrast of the projected image. Adjust the BRIGHTNESS in advance if necessary.
Settings
PICTURE MODE
Depending on the projection environment, you can use these preset parameter settings to optimise image projection. Press I H to cycle through the options.
For a bright room
NORMAL | Setting for a general image, such as | |
sports or games | ||
| ||
DYNAMIC | Bright and sharp setting | |
|
| |
VIVID | Vivid and crisp colour setting | |
CINEMA | ||
| ||
For a dark room | ||
|
| |
CINEMA1 | Hollywood style colours | |
|
| |
CINEMA2 | Deeper and more rich colour setting | |
|
| |
VIDEO | Setting for active images, such as | |
music or concert | ||
| ||
NATURAL | Reproduces the original colour of the | |
image | ||
| ||
|
| |
Lower 
Higher
Setting range:
BRIGHTNESS
You can adjust the brightness of the projected image.
Darker 
Brighter
Setting range:
COLOUR
You can adjust the colour saturation of the projected image.
Lighter 
Darker
Setting range:
When PC is connected, this function is available with 1 125 (1 080)/60i, 1 125 (1 080)/50i,
1 125 (1 080)/60p and 1 125 (1 080)/50p signals only.
28 - ENGLISH
