Panasonic PT-AX100E manual Serial terminal, Technical Information, Connection DIN 8 pin male

Technical Information

Serial terminal

The serial connector which is on the connector panel of the projector conforms to the RS-232C interface specification, so that the projector can be controlled by a personal computer which is connected to this connecter.

Connection

DIN 8 pin (male)

PC	Serial terminal adapter	Serial terminal
	(ET-ADSER: Optional)
		(male)

NOTE:

You must use only an RS-232C Serial Interface Cable with a ferrite core, type ET-ADSER.

Pin assignments and signal names

Pin No.	Signal name	Contents
C	RXD	Received data
D	GND	Earth
E	TXD	Transmitted data
A
B		Connected internally
F
G		NC
H		NC

Communication settings

Signal level	RS-232C	Character length	8 bits
Sync. method	Asynchronous	Stop bit	1 bit
Baud rate	9 600 bps	X parameter	None
Parity	None	S parameter	None

Appendix

42 - ENGLISH