Panasonic PT-DW8300E manual Basic operations using the remote control, Using the Shutter function

Basic operations using the remote control

Basic Operation

AUTO SETUP

INPUT SELECT

SHUTTER

ON SCREEN ASPECT

TEST PATTERN FUNCTION

STATUS

Using the SHUTTER function

If the projector is not used for a certain period of time during the meeting intermission, for example, a shutter mode is available that allows the user to hide images temporarily.

Switching the input signal

You can use the remote control to switch the signals that are being input and projected.

button

Press <INPUT SELECT> button on the remote control or the main unit.

RGB1	Switches to RGB1 input.
RGB2	Switches to RGB2 input.
DVI-D/	Switches to DVI-D or HDMI input.
	If either of the inputs has already been
HDMI	selected, the input switches to the
	other.
VIDEO	Switches to VIDEO input.
S-VIDEO	Switches to S-VIDEO input.
SDI Û	Switches to SDI input.

½½½ SDI: PT-DZ8700U/PT-DS8500U only

STATUS function

Pressing this button displays several pages of projector status information.

button

1111 Press <SHUTTER> button on the remote control or the main unit.

zzThe projected light is blocked by the internal shutter.

2222 Press <SHUTTER> button again.

zzProjection resumes.

Note

zzThe power indicator will flash while the SHUTTER function is being used.

On-screen display function

This button electronically mutes the onscreen menus to avoid disrupting the program.

button

Press <ON SCREEN> button on the remote control.

button

Press <STATUS> button on the remote control.

zzThe [STATUS] screen will be displayed.

STATUS

INPUT

SIGNAL NAME

SIGNAL FREQUENCY

PROJECTOR RUNTIME

LAMP1

LAMP2

INTAKE AIR TEMP.

OPTICS MODULE TEMP.

AROUND LAMP TEMP.

REMAINING FILTER

46 - ENGLISH