Panasonic PT-DZ8700U, PT-DS8500U Technical Information, Response data Data section Blank Mode

Technical Information

JJWhen WEB Control administrator rights password is not set (Non-protect mode)

<Connection method>

1111 Obtain the IP address and port number (Initial set value = 1024) of the projector and make a request for connection to the projector.

You can obtain both IP address and port number from the menu screen of the projector.

IP address : Obtain from MAIN MENU ⇒ [NETWORK] ⇒ [NETWORK STATUS]

Port number : Obtain from MAIN MENU ⇒ [NETWORK] ⇒ [NETWORK CONTROL] ⇒ [COMMAND PORT]

2222 There is a response from the projector.

Response data

	Data section			Blank	Mode		Termination
								symbol
	“NTCONTROL”			‘  ’	‘0’			(CR)
	(ASCII string)			0x20	0x30			0x0d
	9 bytes			1 byte	1 byte			1 byte
	Mode :   0 = Non-protect mode
<Command transmission method>
	Transmit by the following command format.
	Transmitted data
		Header			Data section			Termination
								symbol
	‘0’			‘0’	Control command			(CR)
	0x30			0x30	(ASCII string)			0x0d
	1 byte			1 byte	Undefined length			1 byte
	Receive data
		Header			Data section			Termination
								symbol
	‘0’			‘0’	Control command			(CR)
	0x30			0x30	(ASCII string)			0x0d
	1 byte			1 byte	Undefined length			1 byte
	Error response
			Error message			Termination symbol
	“ERR1”	Undefined control command						(CR)
	“ERR2”	Out of parameter range						0x0d
	“ERR3”	Busy state or no-acceptable period
	“ERR4”	Timeout or no-acceptable period
	“ERR5”	Wrong data length
	“ERRA”	Password mismatch
			4 bytes					1 byte

Appendix

116 - ENGLISH