Panasonic PT-DS8500E, PT-DS8500U, PT-DZ8700U, PT-DZ8700E Hdmi, ON-SCREEN Display, Jjosd Position

6666 Press ◄► to switch [DVI SIGNAL LEVEL].

zzThe setting will change as follows each time ◄► is pressed.

0-255 : PC		16-235
	Select this when, for example,
0-255 : PC	an external device (PC, etc.) is
	connected via the DVI terminal
	output.
	Select this when, for example, an
16-235	external device (DVD player, etc.)
	is connected via the HDMI terminal
	output using a conversion cable.

Note

zzThe optimal setting differs depending on the output setting of the connected external device. Refer to the instruction manual of the external device.

zzIf the setting is changed, the data for plug and play changes. For the plug and play compatible resolutions, refer to “List of compatible signals” (Æpage 122).

HDMI IN

Change this setting if video does not display normally when the projector and an external device are connected via HDMI.

1111 Press ▲▼ to select [HDMI IN].

2222 Press <ENTER> button.

zzThe [HDMI IN] screen will be displayed.

3333 Press ◄► to switch [HDMI SIGNAL LEVEL].

zzThe setting will change as follows each time

DISPLAY OPTION menu

SDI IN (PT-DZ8700/PT-DS8500 only)

You can select signal amplitude type. Available with YPBPR or RGB of HD-SDI signal.

1111 Press ▲▼ to select [SDI IN].

2222 Press <ENTER> button.

zzThe [SDI IN] screen will be displayed.

3333 Press ◄► to switch [SDI SIGNAL LEVEL].

zzThe setting will change as follows each time ◄► is pressed.

64-940		4-1019
64-940	Normal setting
4-1019	For when grey color is too close to
	black

ON-SCREEN DISPLAY

The user can specify the on-screen display.

1111 Press ▲▼ to select [ON-SCREEN DISPLAY].

2222 Press <ENTER> button.

zzThe [ON-SCREEN DISPLAY] screen will be displayed.

3333 Press ▲▼ to select the desired item, and press ◄► to change the setting.

JJOSD POSITION

This sets the position of the on-screen display (OSD).

◄► is pressed.

0-1023		64-940
	Select this when, for example, a DVI
0-1023	terminal output of an external device
	(PC etc.) is connected to HDMI IN
	using a conversion cable, etc.
	Select this when, for example,
64-940	an HDMI terminal output of an
	external device (DVD player, etc.) is
	connected to HDMI IN.

Note

zzThe optimal setting differs depending on the output setting of the connected external device. Refer to the instruction manual for the external device.

zzThe displayed HDMI signal level is the value when the input is 30 bit.

2 (Left center of the screen)

1 (Top left

of the screen)

9 (Bottom right of the screen)

8 (Right center of the screen)

3 (Bottom left of the screen)

4 (Top center of the screen)

5(Center of the screen)

6 (Bottom center

of the screen)

7 (Top right

of the screen)

Settings

ENGLISH - 73