Settings
PICTURE menu
COLOR TEMPERATURE
You can adjust the white balance of the projected image.
1111 Press ▲▼ to select [COLOR TEMPERATURE].
2222 Press ◄► or <ENTER> button.
zzThe [COLOR TEMPERATURE] individual adjustment screen will be displayed.
3333 Press ◄► to switch [COLOR TEMPERATURE].
zzThe setting will change as follows each time ◄► is pressed.
DEFAULT Û |
| USER1 |
| USER2 |
|
| (in units of 100K) |
|
|
9300K |
|
| 3200K | |
|
|
|
½½½ [DEFAULT] cannot be selected when the [PICTRUE MODE] has been set to [USER] or [DICOM SIM.].
Note
zzWhen any setting other than [OFF] has been selected for [COLOR MATCHING] (Æpage 68), the [COLOR TEMPERATURE] setting is fixed to [USER1].
zzThe value of color temperature is for reference only.
JJTo further adjust toward the desired white balance
4444 Select [USER1] or [USER2] in Step 3).
5555 Press <ENTER> button.
zzThe [COLOR TEMPERATURE] screen will be displayed.
6666 Press ▲▼ to select [WHITE BALANCE].
7777 Press <ENTER> button.
zzThe [WHITE BALANCE] screen will be displayed.
8888 Press ▲▼ to select [WHITE BALANCE HIGH] or [WHITE BALANCE LOW].
9999 Press <ENTER> button.
zzThe [WHITE BALANCE HIGH (or LOW)] screen will be displayed.
11111Press ▲▼ to select [RED], [GREEN] or [BLUE].
11111Press ◄► to adjust the level.
Item | Operation | Adjustment | Adjustment | |
range | ||||
|
|
| ||
| Press ►. | Deepens red. | Maximum | |
| value | |||
RED |
|
| ||
Press ◄. | Weakens red. | HIGH : 255 | ||
| ||||
| LOW : 127 | |||
|
|
| ||
|
|
|
| |
| Press ►. | Deepens green. | Minimum | |
GREEN |
|
| value | |
|
| |||
| Press ◄. | Weakens green. | HIGH : 0 | |
|
|
| LOW : | |
| Press ►. | Deepens blue. | ||
|
| |||
BLUE |
|
| Default | |
|
| |||
| Press ◄. | Weakens blue. | HIGH : 255 | |
|
|
| LOW : 0 |
Note
zzAll colors will not be displayed properly unless adequate adjustment is made. If the adjustment does not look suitable, you can press <DEFAULT> button to return the setting for the selected item only to the factory default setting.
zzThe [COLOR TEMPERATURE] cannot be adjusted for the internal test pattern (Æpage 88). Be sure to project the input signal when adjusting the [COLOR TEMPERATURE].
JJChanging the name of [USER 1] or [USER 2]
111 Select [USER1] or [USER2] in step 3).
222 Press <ENTER> button.
zzThe [COLOR TEMPERATURE] screen will be displayed.
333 Press ▲▼ to select [COLOR TEMPERATURE NAME CHANGE].
444 Press <ENTER> button.
zzThe [COLOR TEMPERATURE NAME CHANGE] screen will be displayed.
COLOR TEMPERATURE NAME CHANGE
54 - ENGLISH
