Panasonic PT-DS8500U, PT-DS8500E, PT-DZ8700U Dvi-D, JJAdjusting the signal level automatically

Settings

DISPLAY OPTION menu

JJAdjusting the position automatically

111 Select [POSITION ADJUST] in step 3).

222 Press ◄► to switch [POSITION ADJUST].

zzThe setting will change as follows each time ◄► is pressed.

OFF		ON
OFF	Automatic adjustment is off.
ON	Screen position and size are
	adjusted during AUTO SETUP
	operation.

JJAdjusting the signal level automatically

111 Select [SIGNAL LEVEL ADJUST] in step 3).

222 Press ◄► to switch [SIGNAL LEVEL ADJUST].

zzThe setting will change as follows each time ◄► is pressed.

OFF		ON
OFF	Automatic adjustment is off.
	The black level (On-screen menu
ON	[BRIGHTNESS]) and white level
	(On-screen menu [CONTRAST])
	are adjusted during AUTO SETUP
	operation.

Note

zzIf the input image is not a still image with a clear difference between black and white, the [SIGNAL LEVEL ADJUST] function may not operate normally.

RGB IN (Only RGB input)

Change this setting to change the input impedance of the synchronous signal input.

1111 Press ▲▼ to select [RGB IN].

2222 Press <ENTER> button.

zzThe [RGB IN] screen will be displayed.

3333 Press ▲▼ to select [RGB1 SYNC TERMINAL] or [RGB2 SYNC TERMINAL].

4444 Press ◄► to switch.

zzThe setting will change as follows each time ◄► is pressed.

LOW		HIGH
LOW	Input impedance is set to [LOW].
HIGH	Input impedance is set to [HIGH].

DVI-D IN

Change this setting if video does not display normally when the projector and an external device are connected via DVI.

1111 Press ▲▼ to select [DVI-D IN].

2222 Press <ENTER> button.

zzThe [DVI-D IN] screen will be displayed.

3333 Press ▲▼ to select [DVI EDID].

4444 Press ◄► to switch [DVI EDID].

zzThe setting will change as follows each time ◄► is pressed.

EDID3		EDID1	EDID2 : PC
EDID3	Switch between fine settings for a
	moving image and for a still image.
	Mainly select this when an external
EDID1	device (DVD player, etc.) for
	outputting video signals of a moving
	image system is connected to DVI-D
	IN.
	Mainly use this when an external
EDID2 : PC	device (PC, etc.) for outputting video
	signals of a still image system is
	connected to DVI-D IN.

5555 Press ▲▼ to select [DVI SIGNAL LEVEL].

72 - ENGLISH