About Your Projector
JJCONTROL PANEL
<STANDBY> button Returns to the standby mode.
<POWER ON> button
Starts the projection while in the standby mode.
VIDEO
Switches to VIDEO input.
Switches to
RGB1
Switches to RGB1 input.
RGB2
Switches to RGB2 input.
Switches to
SDI
Switches to SDI input.
JJTerminals on side
REMOTE 2 IN
Connect a cable from an external control circuit.
REMOTE 1 IN/OUT When two or more main units are used in the system, they can be connected and controlled with wired remote control cable.
SDI IN
Connect an SDI signals.
HDMI IN
Connect a HDMI signals.
VIDEO IN
Connect a VIDEO signals.
Connect an
<MENU> button
Displays and clears the main menu, and returns to the previous menu when the menu is displayed.
If you hold it down for at least 3 seconds while the
<LENS> button
This button is used together with ▲▼◄► to adjust focus, zoom and shift by the projection lens.
<ENTER> button
Press to activate a menu selection or to initiate a function.
<SHUTTER> button
Pressing this button toggles the projector’s internal mechanical shutter to black out the projector. (Æpage 46)
▲▼◄► button
Use these buttons to select menu items, change settings, adjust levels, and to enter the [SECURITY] password.
<AUTO SETUP> button
Pressing this button while projecting an image automatically corrects the picture positioning on the screen. While the auto setup feature is active, a message “PROGRESS” appears on the screen.
(Æpage 47)
SERIAL IN/OUT
Connect an
Connect a single link
LAN
Connect a LAN cable for network connection.
RGB2 IN
Connect an RGB or YPBPR signals.
RGB (YPBPR)1 IN
Connect an RGB or YPBPR signals.
Preparation
Attention
zzDo not touch the LAN terminal with your bare hands or body, as body parts may have charged static electricity. Failure to do so may cause malfunctions.
Do not touch the metallic parts of LAN terminal and cable. zzPlease connect the LAN to indoor devices only.
ENGLISH - 19
