Oven Components Diagram
i e s r iwe | r |
| q |
a o
r
e
f
|
| t |
w | u | y d |
gg
qDisplay Window
wDoor Safety Lock System e Oven Air Vent
r Warning Label t Menu Label
y Identification Plate u Oven Window
i Rail (use only for Oven Tray) o Power Supply Cord
a Power Supply Plug s Flat Table
1.If the flat table is hot, allow cooling down before cleaning.
2.Do not cook directly on the flat table. Always put food in a container or on a rack.
dDoor Release Button
Push to open the door. Opening the door during cooking will stop the cooking process without cancelling the program. Cooking resumes as soon as the door is closed and Start button is pressed. It is quite safe to open the door at any time during a cooking program and there is no risk of Microwave exposure.
fControl Panel
hj
gWire Rack (High, Low)
(a)Wire Rack is included with the oven in order to facilitate browning of small dishes.
(b)Wire Rack should be cleaned regularly.
(c)When using Wire Rack in the manual GRILL or COMBINATION cooking modes, be careful to choose
(d)When using the COMBINATION mode, never place any aluminum or metal container directly on Wire Rack. Always insert a glass plate or dish between Wire Rack and the aluminum container. This will prevent sparking that may damage the oven.
(e)Do not use Wire Rack when cooking in the MICROWAVE mode.
(f)Don't use it together with oven tray.
hGlass Dish
Never insert in the sets of rails.
jOven Tray
1.For convection, grill only.
2.After cooking, don't touch it by hand directly to avoid scalding.
Oven Light
Oven Light will turn on during cooking and also when door is opened.
Note:
The above illustration is for reference only.
13
IP3153_39M80CP_Eng_22_100908.indd 13
