SIGNAL LIST menu
zzSee “Navigating through the menu” (Æpage 49).
zzSee “MAIN MENU” and “SUB MENU” (Æpage 50).
JJREGISTERED SIGNAL STATUS
zzThe name can be set for each sub memory. zzMEMORY NO. : A1
Sub memory number
When the address number (A1, A2, …H7,
H8) signal is registered
Registering a signal to the list
When a new format input signal is applied to the projector, press <MENU> button to register to the
SIGNAL LIST.
Note
zzYou can register data up to 96 in total number of the signal data and any corresponding sub memory data.
zzThe memories are numbered over 12 pages (A to L: 8 data items can be registered on each page), and the data is registered in the unused memory with the lowest number. If all the memories are used, the data of the old signals is overwritten in sequence.
zzThe names of the registered data are automatically determined by the input signals and memory numbers.
zzIf a menu is being displayed, the new signals will be registered at the instant they are input.
Renaming a registered data
1111 Press ▲▼◄► to select the required signal data.
2222 Press <ENTER> button.
zzThe [REGISTERED SIGNAL STATUS] screen will be displayed.
zzDisplays the character list.
zzPress <MENU> button to return to the [REGISTERED SIGNAL LIST] screen.
3333 Press <ENTER> button.
zzThe [RENAME] screen will be displayed.
4444 Press ▲▼◄► to select characters and press <ENTER> button to input them.
5555 Press ▲▼◄► to select [OK], and press <ENTER> button.
zzThe [REGISTERED SIGNAL LIST] screen will be displayed.
zzPress ▲▼◄► to select [CANCEL] and press <ENTER> button to return to the [REGISTERED SIGNAL LIST] without any change.
Deleting a registered data
1111 Press ▲▼◄► to select the required signal data.
2222 Press <DEFAULT> button.
zzThe [ENTRY SIGNAL CLEAR] screen will be displayed.
zzPress <MENU> button to cancel and return to the [REGISTERED SIGNAL LIST] without any change.
3333 Press <ENTER> button.
zzDisplays [REGISTERED SIGNAL LIST] and
confirm the data is deleted.
Settings
ENGLISH - 89
