Panasonic Authentication set up page, Ping test page

NETWORK menu
104 - ENGLISH
Settings
Authentication set up page
J
The POP/SMTP server is set on this page when POP/SMTP authentication is required for mail transmissions.
Click [Detailed set up], then [Authentication set up] to display the Authentication server setup page.
Select the authentication method specied by
your Internet service provider.
Set this if SMTP authentication has been
selected.
POP server name eld
Available input characters:
Alphanumeric characters (A - Z, a - z, 0 - 9),
hyphen (-), period (.)
POP/SMTP server user name eld
POP/SMTP server password eld
Enter the port number for the SMTP server
(normally “25”).
Enter the port number for the POP server
(normally “110”).
Button to update settings
Ping test page
J
This page makes it possible to check whether the network is connected to the E-mail server, POP server,
DNS server, etc.
Click [Detailed set up], then [Ping test] to display the Ping test page.
Enter the IP address of the server to be tested.
Button for conducting the test.
Display which appears when the connection
failed.
Display which appears when the connection
was successful.