Panasonic PT-DZ8700E manual System Selector, To display pictures complying with the sRGB standard

SYSTEM SELECTOR

This enables the projector to automatically recognize input signals. Furthermore, if unstable signals are input, the system format can be selected manually.

1111 Press ▲▼ to select [SYSTEM SELECTOR].

2222 Press <ENTER> button.

3333 Press ▲▼ to switch [SYSTEM SELECTOR].

4444 Press <ENTER> button.

JJVIDEO/S-VIDEO terminal input signal

Select from AUTO, NTSC, NTSC4.43, PAL, PAL-M, PAL-N, SECAM, and PAL60.

Attention

zz[AUTO] mode is selected by default.

zzWhen the projector is not working properly in [AUTO] mode, change the setting according to each SYSTEM SELECTOR type.

Note

zz[AUTO] automatically selects from NTSC, NTSC4.43, PAL, PAL-M, PAL-N, SECAM, and PAL60.

JJRGB1/RGB2 terminal input signal

zz480i, 576i, 576p signals Select from RGB and YCBCR.

zzVGA60, 480p signals

Select from VGA60, 480p, and 480pRGB. zzOther signals

Select from RGB and YPBPR.

Note

zzRefer to “List of compatible signals” (Æpage 122) for available signals.

JJDVI-D terminal input signal

zz480p, 576p signals

Select from RGB and YCBCR. zzOther signals

Select from RGB and YPBPR.

Note

zzRefer to “List of compatible signals” (Æpage 122) for available signals.

zzMalfunction may occur or other problems could be encountered with some equipment.

PICTURE menu

JJHDMI terminal input signal

zz480p, 576p signals

Select from Auto, RGB, and YCBCR. zzOther signals

Select from Auto, RGB, and YPBPR

Note

zzRefer to “List of compatible signals” (Æpage 122) for available signals.

zzMalfunction may occur or other problems could be encountered with some equipment.

JJSDI terminal input signal

(PT-DZ8700U/PT-DS8500U only)

zzSelect from AUTO, 1 080/60i, 1 035/60i, 720/60p, 1 080/24p, 1 080/50i, 1 080/30p,

1 080/25p, 1 080/24sF, 720/50p, 480i, and 576i. zzRefer to “List of compatible signals”

(Æpage 122) for available signals.

To display pictures complying with the sRGB standard

sRGB is the international color reproduction standard (IEC61966-2-1) established by IEC (International Electrotechnical Commission).

To reproduce colors more faithfully in compliance with the sRGB standard, perform the following setting procedure.

1111 Set [COLOR MATCHING] adjustment to [OFF].

zzRefer to “COLOR MATCHING” (Æpage 68).

2222 Display the [PICTURE] screen.

zzRefer to “PICTURE menu” (Æpage 52).

3333 Press ▲▼ to select [PICTURE MODE].

4444 Press ◄► to select [NATURAL].

5555 Press ▲▼ to select [COLOR].

6666 Press <DEFAULT> button on the remote control to restore the factory default.

7777 Follow the same procedure (steps

5-6) to restore the factory default for [TINT], [COLOR TEMPERATURE] and [GAMMA].

Note

zzsRGB is only enable when RGB signals are being input.

Settings

ENGLISH - 57