Setting up
Screen size and throw distance
When planning the projector and screen geometry, refer to the figures below and the information on the following pages for reference. After the projector is roughly positioned, picture size and vertical picture positioning can be finely adjusted with the powered zoom lens and lens shifting mechanism.
Getting Started
Projected image
SH
SW
SH
SW
H
Screen
L(LW/LT)
L (LW/LT)
Screen
L (LW/LT) Û | Projection distance (m) |
SH | Height of the projection area (m) |
SW | Width of the projection area (m) |
HVertical distance between the lens center level and the bottom edge of the projected image. (m)
SD | Diagonal length of the projection area (") |
½½½ LW : Minimum distance LT : Maximum distance
Attention
zzBefore installing, please read “Precautions with regard to safety” (Æ pages 8 to 16)
zzSpecial care should be used when DLP projectors are used in the same room as high power laser equipment.
Direct or indirect hitting of a laser beam on to the lens can severely damage the Digital Mirror Devices ™ in which case there is a loss of warranty.
22 - ENGLISH
