ADT Security Services Security System Single-Buttonpaging Feature, PANIC KEYS Continued, Ð 22 Ð

PANIC KEYS (Continued)

See your installer and note here any functions programmed for your system.

CHECK IF	PANIC		ZONE
ACTIVE	KEY(S)	PLACE A CHECK NEXT TO PROGRAMMED FUNCTION	DISPLAY
ÊÊÊÊ	ÊÊÊÊ[A]	___SILENT,Ê Ê___AUDIBLE,Ê Ê___PERSONAL, ___FIRE,ÊÊÊ___ARM AWAY*	9 5	†
ÊÊÊÊ	ÊÊÊÊ[B]	___SILENT,ÊÊÊ___AUDIBLE,ÊÊ___PERSONAL,Ê ___FIRE,ÊÊ ___ARM STAY*	9 9	†
ÊÊÊÊ	ÊÊÊÊ [C]	Ê	96
		___SILENT,ÊÊ ___AUDIBLE,Ê ___PERSONAL Ê ___FIRE.

NOTE: KEY [D] DOES NOT PROVIDE A PANIC FUNCTION (SEE ÒSINGLE-BUTTON PAGING FEATUREÓ SECTION BELOW).

*ÊKEYS [A] AND [B] MAY HAVE BEEN PROGRAMMED FOR SINGLE-BUTTON ARMING INSTEAD OF AN EMERGENCY

ÊÊÊÊFUNCTION, AS SHOWN.

†THIS ZONE NUMBER NOT DISPLAYED IF KEY HAS BEEN PROGRAMMED FOR SINGLE BUTTON ARMING (ARM-AWAY or

ÊÊÊÊARM-STAY)

Manually Initiating a Fire Alarm

Should you become aware of a fire emergency, go to your nearest Touchpad and manually initiate a fire alarm by pressing the ÒAÓ key. Check below, and in the chart above.

The ÒAÓ key is normally assigned for manually initiating a FIRE alarm.	KEY ASSIGNED FOR FIRE
Verify this with your installer.
	Press	A	for 2 seconds.

SINGLE-BUTTON PAGING FEATURE

The ÒDÓ key on the touchpads can be used to send a signal to a Pager (check if this feature has been programmed in your system). The message displayed on the Pager when the ÒDÓ key is pressed is 999–9999. This code could mean Òcall homeÓ, Òcall your officeÓ, or other message. A pre-arranged meaning for this signal should be agreed upon. See the illustration on page 12 for the location of the ÒDÓ key.

To send a signal to the Pager, simply press the ÒDÓ key for at least 2 seconds. The recipient, on seeing the 999–9999 display, will understand the pre-arranged meaning of this signal.

Ð 22 Ð