ADT Security Services Security System user manual Arming ALL Protection With Entry Delay on, 16 Ð

ARMING ALL PROTECTION (With Entry Delay ON)

Using the

ÊÊ 2 Ê ÊAWAY Key

BEFORE ARMING,

close all doors and windows (see CHECKING FOR OPEN ZONES on page 13)

THE AWAY KEY ARMS THE ENTIRE SYSTEM (INTERIOR AND PERIMETER), BUT ALLOWS USE OF THE ENTRY/EXIT DOOR.

Use this key when no one will be staying inside.

1.Enter your security code and press the AWAY [2] key. In some systems, pressing the ÒAÓ key on the touchpad for 2 seconds will arm the system AWAY (no code is required). The ÒAÓ key may or may not have been programmed for this. Check with your installer.

2.The touchpad begins beeping and displays the armed AWAY message. The red ARMED indicator also lights.

3.You must leave through an entry/exit door during the exit delay period to avoid causing an alarm. The touchpad will beep rapidly during the last 5 seconds of the exit delay to warn you that the delay is ending.

After the exit delay expires, the system arms and will sound an alarm if a protected window or non-entry/exit door is opened, or if any movement is detected inside your premises.

You may re-enter through an entry/exit door, but must disarm the system within the entry delay period to avoid an alarm.

TYPICAL DISPLAYS	TYPICAL DISPLAYS AFTER EXIT DELAY
DURING EXIT DELAY	(SYSTEM FULLY ARMED IN AWAY MODE)
m	m

ARME D *** AWAY ***		ARME D *** AWAY ***
YOU M AY E XIT NOW		**AL L SECURE **
CUSTOM DISPLAY TOUCHPAD			CUSTOM DISPLAY TOUCHPAD
AWAY	AC		AWAY	AC

ENGLISH DISPLAY TOUCHPAD Ê ÊÊÊENGLISH DISPLAY TOUCHPAD

Ð 16 Ð