ADT Security Services Security Manager 2000, Security System SYSTEM OVERVIEW Continued, Ð 5 Ð

SYSTEM OVERVIEW (Continued)

Burglary Your system provides three modes of burglary protection: STAY, AWAY, and INSTANT, and Protection allows you to BYPASS selected zones while leaving the rest of the system armed. You must

turn on or "arm" the burglary protection portion of your system before it will sense an intrusion.

The system also provides a CHIME mode, for alerting users to the opening of protected doors and windows while the system is disarmed. Refer to the other sections of this manual for procedures for using these features.

The following table lists the four different arming modes and the results of each.

ÊA r m i n g		Features For Each Arming Mode
ÊMode	Exit Delay	Entry Delay	Perimeter Armed	Interior Armed
AWAY	Yes	Yes	Yes	Yes
STAY	Yes	Yes	Yes	No
INSTANT	Yes	No	Yes	No

Security Codes At the time of installation, you were assigned a personal four-digit security code, known only to you. You must enter the security code when arming and disarming the system, and when performing other system functions. As an additional safety feature, other users who do not have a need to know your code can be assigned different security codes. Refer to the SECURITY CODES section for detailed information on security codes.

Alarms When an alarm occurs, both the touchpad and external sounders will sound, and the touchpad will display the zone(s) causing the alarm. If your system is connected to a Customer Care Center, an alarm message will also be sent. To stop the alarm sounding, simply disarm the system.

Memory of Alarm When an alarm condition occurs, the touchpad displays the number(s) of the zone(s) that caused the problem, and displays the type of alarm. It remains displayed until it is cleared by disarming the system (see DISARMING THE SYSTEM section).

Ð 5 Ð