ARMING PERIMETER ONLY (With Entry Delay OFF)
Using the
Ê7 Ê INSTANT Key
BEFORE ARMING, close all doors and windows (see CHECKING FOR OPEN ZONES on page 13)
THE INSTANT MODE ARMS THE PERIMETER (INCLUDING ENTRY/EXIT DOOR), WITH NO ENTRY DELAY. PERSONS WITHIN THE PREMISES CAN MOVE ABOUT FREELY
Ask your installer if this feature is programmed in your system. If so, place a check in this box. ÊÊÊÊ
Use this key when staying inside and do not expect anyone to use an entry/exit door.
CAUTION: Arming the system in this mode will greatly increase the chance of false alarms. Use extreme care in selecting this mode of arming.
1.Enter your security code and press the INSTANT [7] key.
2.The touchpad beeps three times and displays the armed message. The red ARMED indicator lights. Note that there is an exit delay in effect before arming actually takes place. See the note below.
3.After arming, an alarm sounds immediately if any protected perimeter door or window is opened, but you may otherwise move freely throughout the premises.
An alarm sounds immediately if anyone opens an entry/exit door.
Exit Delay Restart. If you wish to open the entry/exit door to let someone in after Êarming INSTANT, you can
Note: When you first arm the system in the INSTANT mode, ÒYou may exit nowÓ will be displayed on the second line of a Custom Display touchpad during the programmed exit delay. This delay is in effect in the system even when arming INSTANT. When the exit delay period ends, ÒYou may exit now Ó disappears and the system is fully armed in the INSTANT mode.
TYPICAL DISPLAYS Ð ÊÒARMED INSTANTÓ
|
|
|
|
|
|
|
|
|
| AC |
|
|
| ARME D *INSTANT* |
|
| STAY |
|
|
|
|
| |
| INSTANT |
|
|
|
| YOU M AY E XIT NOW |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
ENGLISH DISPLAY TOUCHPAD | CUSTOM DISPLAY TOUCHPAD |
