ADT Security Services Security System, Security Manager 2000 user manual Security Codes

SECURITY CODES (Continued)

To Add a User or Change a User's Code

Important: Temporary users of the system (e.g., babysitters, cleaning staff) should not be shown how to use any system function they do not need to know, such as bypassing protection zones for example.

Sequential key depressions for all steps in a procedure must be made within 2 seconds of one another, or else the entire entry is aborted and must be repeated from its beginning (e.g., perform steps 1, 2, and 3 below with no delay between steps).

Changing your Master Code

Follow this procedure:

1.ÊÊÊ ÊÊÊ ÊÊÊ

(Master Code)

CODE

ÊÊÊ + ÊÊÊ8Ê Ê

Enter master code, then press CODE key.

Example: Ê 7 Ê Ê 2 Ê Ê 9 Ê Ê 6 Ê then press the CODE key.

Enter your existing Master code + [8] + [0][2]

+new Master code + new Master code again.

2. ÊÊÊ ÊÊÊ

(User Number)

3.ÊÊÊ ÊÊÊ ÊÊÊ

(User's Code)

ÊÊÊ

ÊCODE

Enter user number. Enter the 2-digit User Number (03-16) for the user you are adding or changing.

Enter user's code.

Enter the new 4-digit security code for that user.

To Delete a User

1.		ÊÊÊ		ÊÊÊ		ÊÊÊ	ÊÊÊ	+	ÊÊÊ8Ê Ê
	(Master Code)
2.	ÊÊÊ	ÊÊÊ
		(User Number)

3.-----------

Enter master code, then press CODE key.

Example: Ê 7 Ê Ê 2 Ê Ê 9 Ê Ê 6 Ê then press the CODE key.

Enter user number.

Enter the 2-digit User Number (03-16) for the user whose code you are deleting.

Stop .

Wait (about 3 seconds) until the touchpad beeps once before pressing any other key. The code is automatically deleted.

Ð 26 Ð