![](/images/new-backgrounds/1264788/26478817x1.webp)
Before use
Accessories
Make sure the following accessories are provided with your projector.
Remote control (N2QAYB000064 x 1) | AA batteries for Remote control (x 2) |
Mains lead for continental Europe (K2CM3FR00002 x 1)
Mains lead for UK (K2CT3FR00003 x 1)
Preparation
Cautions when transporting
Do not subject the projector to excessive vibration or shocks. The projector lens need to be handled with care.
Cover the lens with the lens cover when transporting the projector.
Cautions when installing
Avoid setting up in places which are subject to vibration or shocks.
The internal parts can be damaged, which may cause malfunctions or accidents.
Avoid setting up in places which are subject to sudden temperature changes, such as near an air conditioner.
The life of the lamp may be shortened or the projector may be turned off. See “TEMP indicator” on page 36.
Do not set up the projector near
The projector may be subject to electromagnetic interference.
If installing the projector to the ceiling, ask a qualified technician to carry out all installation work.
You will need to purchase the separate installation kit (Model No.
If using this projector at high elevations
(above 1 400 m), set the ALTITUDE to HIGH. See “ALTITUDE” on page 35.
Failure to observe this may result in malfunctions or the life of the lamp or the other components may be shortened.
ENGLISH - 9